VELOX SIL – KIT
FOUL-RELEASE for propellers
VELOX Sil is a kit composed of a brand new silicone foul-release antifouling and an innovative hybrid primer, free from biocides and substances of very high concern (SVHC) for the health of the operator, such as carcinogenic substances.
It therefore has a lower environmental impact and simplifies the management of safety on the construction site (environmental authorizations, chemical risk assessment, health surveillance of applicators).
VELOX SIL has been field-tested with results that have allowed the product to be perfected until reaching an exceptional result, exceeding expectations both in terms of adhesion and effectiveness.
Below is a propeller after several months in the water, at the end of a period of frequent use.
Below are pictures of the same propeller after over eight months in the water, now sitting for many months (over four). The first picture shows the propeller as it was before moving the boat, the second after turning the propeller for a few minutes.
months
of motion
VELOX SIL
SILICONE FOUL-RELEASE COATING FOR PROPELLERS
VELOX SIL keeps immersed surfaces clean thanks to the surface tension of the silicone finish, which causes any organisms to detach with the movement of the propeller or with light cleaning with a sponge.
| technical data | |
|---|---|
| APPLICATION | Brush-Roller |
| PACKAGING | Kit 0,25L, 0,5L, 1L |
| VOLUME SOLID | 83% |
| VOC | 160 g/L |
| THEORETICAL COVERAGE | 6 m2/L |
| SHELF-LIFE | 24 months |
| SPECIFIC WEIGHT | 0,97 |
| THINNER | – |
PRIME SIL
EPOXY PRIMER FOR VELOX SIL
PRIME Sil is a hybrid epoxy primer with a unique and innovative blend of resins that provides exceptional adhesion to metal parts and resists the extreme conditions of galvanic currents and cavitation. Specifically designed for the VELOX Sil silicone finish.
COLOURS
- #ffffff
- #000000
- #9b9b9b
| CARATTERISTICHE TECNICHE | |
|---|---|
| APPLICATION | Brush, Roller, Airless |
| PACKAGING | Kit 0,25L, 0,5L, 1L |
| VOLUME SOLID | 55% |
| VOC | 370 – 380 g/L |
| THEORETICAL COVERAGE | 10-12 m2/L per coat |
| SHELF-LIFE | 24 months |
| SPECIFIC GRAVITY | 1,40 – 1,45 |
| THINNER | N. 5 |
| MIXING RATIO | 9:1 in weight, 85:15 in volume |
| POT-LIFE | 3 hours |